HF32F-012-HSLQ3 JZC-32F-012-HSLQ3 8A/250VAC

  • Shipping Weight: 0.02lbs
  • 9867 Units in Stock
Qty :

Qty Discounts Off Price





Basic Information
ManufacturerHong Fa

● 10A switching capability
● 1 Form A and 1 Form C configurations
● Subminiature, standard PCB layout
● Plastic sealed and flux proofed types available
● UL insulation system: Class F
● Environmental friendly product (RoHS compliant)
● Outline Dimensions: (18.4 x 10.2 x 15.3) mm

File No.:E134517

File No.:40012204

File No.:CQC08002027011
Contact Data
Contact Type: 1A,1C
Contact Resistance: 100mΩ max. (at 1A 6VDC)
Contact Material: AgNi,AgCdO
Contact Rating:
1A Standard:
H:5A 250VAC
5A 30VDC
10A 125VAC
Sensitive: HL:3A 250VAC
3A 30VDC、HLQ:8A 250VAC
1C Standard: 3A 250VAC、
3A 30VDC
Max. switching Voltage: 250VAC / 30VDC
Max. switching Current: 10A
Max. Switching Power: 1250VA / 150W
Mechanical Endurance: 1×107OPS
Electrical Endurance: 1×105OPS

Insulation Resistance: 1000MΩ (500VDC)
Dielectric Strength:
Between coil & contacts
2500VAC 1min
Between open contacts 1000VAC 1min
Operate Time (at nomi. volt.): 8ms max.
Release Time (at nomi. volt.): 5ms max.
Shock Resistance:
Destructive 980m/s2
Vibration Resistance: 10Hz to 55Hz 1.5mm DA
Humidity: 5% to 85% RH
Ambient Temperature: Standard:-40℃ to 70℃
High capacity:-40℃ to 70℃
Unit Weight: Approx. 6g
Terminal Type: THT
Construction: Plastic sealed, Flux proofed
  Coil Data
Nominal Voltage: 3,5,6,9,12,18,24,48VDC
Pick-up Voltage: Operating voltage is 75% of the nominal voltage
Drop-out Voltage: Release voltage is 5% of the nominal voltage
Coil Power: Standard: Approx. 450mW;
Sensitive: Approx.200mW


  Outline Dimensions, Wiring Diagram and Pc Board Layout

  Ordering Information


Payment ACCEPT:


Registered Air Mail
Please make sure your shipping address is correct. 

You can leave your phone number for better service, the post office will able to contact you and please don't worry, we won't record your private information.

You can estimate Shipping cost before check out in shop cart

Normally shipping cost is within $4 ~ $6